First Lock Spare Cams

The plate can be used to stop a camlock from spinning if a round hole has been drilled for installation, or as a repair plate.

Weather cover to suit round face cam locks, extend the working life of cam locks outside on toolboxes letterboxes etc.

Protects from water, debris and dust getting into the keyway
 

20mm Straight cam for use with FL Round face and Square face Cam locks

20mm length is measured from centre of hole to the end of the cam.

27mm Straight cam for use with FL Round face and Square face Cam locks

27mm length is measured from centre of hole to the end of the cam.

30mm Straight cam for use with FL Round face and Square face Cam locks

30mm length is measured from centre of hole to the end of the cam.

35mm Straight cam for use with FL Round face and Square face Cam locks

35mm length is measured from centre of hole to the end of the cam.

38mm Straight cam for use with FL Round face and Square face Cam locks

38mm length is measured from centre of hole to the end of the cam.

40mm Straight cam for use with FL Round face and Square face Cam locks

40mm length is measured from centre of hole to the end of the cam.

45mm Straight cam for use with FL Round face and Square face Cam locks

45mm length is measured from centre of hole to the end of the cam.

50mm Straight cam for use with FL Round face and Square face Cam locks

50mm length is measured from centre of hole to the end of the cam.

60mm Straight cam for use with FL Round face and Square face Cam locks

60mm length is measured from centre of hole to the end of the cam.

33mm Bent cam with a 11mm bend for use with FL Round face and Square face Cam locks

33mm length is measured from centre of hole to the end of the cam.

33mm Bent cam with a 12mm bend for use with FL Round face and Square face Cam locks

33mm length is measured from centre of hole to the end of the cam.

31mm Bent cam with a 16mm bend for use with FL Round face and Square face Cam locks

31mm length is measured from centre of hole to the end of the cam.

37mm Bent cam with a 2mm bend for use with FL Round face and Square face Cam locks

37mm length is measured from centre of hole to the end of the cam.

29mm Bent cam with a 3mm bend for use with FL Round face and Square face Cam locks

29mm length is measured from centre of hole to the end of the cam.

41mm Bent cam with a 3mm bend for use with FL Round face and Square face Cam locks

31mm length is measured from centre of hole to the end of the cam.

25mm Bent cam with a 5mm bend for use with FL Round face and Square face Cam locks

25mm length is measured from centre of hole to the end of the cam.

33mm Bent cam with a 5mm bend for use with FL Round face and Square face Cam locks

33mm length is measured from centre of hole to the end of the cam.

50mm Bent cam with a 5mm bend for use with FL Round face and Square face Cam locks

50mm length is measured from centre of hole to the end of the cam.

31mm Bent cam with a 6mm bend for use with FL Round face and Square face Cam locks

31mm length is measured from centre of hole to the end of the cam.

37mm Bent cam with a 6mm bend for use with FL Round face and Square face Cam locks

37mm length is measured from centre of hole to the end of the cam.

47mm Bent cam with a 7mm bend for use with FL Round face and Square face Cam locks

47mm length is measured from centre of hole to the end of the cam.

40mm Bent cam with a 8mm bend for use with FL Round face and Square face Cam locks

40mm length is measured from centre of hole to the end of the cam.

42mm Bent cam with a 9mm bend for use with FL Round face and Square face Cam locks

42mm length is measured from centre of hole to the end of the cam.

20mm Notched cam for use with FL Round face and Square face Cam locks

20mm length is measured from centre of hole to the flat section of the cut out.

24mm Notched cam for use with FL Round face and Square face Cam locks

24mm length is measured from centre of hole to the flat section of the cut out.

27mm Notched cam for use with FL Round face and Square face Cam locks

27mm length is measured from centre of hole to the flat section of the cut out.

30mm Notched cam for use with FL Round face and Square face Cam locks

30mm length is measured from centre of hole to the flat section of the cut out.

33mm Notched cam for use with FL Round face and Square face Cam locks

33mm length is measured from centre of hole to the flat section of the cut out.

36mm Notched cam for use with FL Round face and Square face Cam locks

36mm length is measured from centre of hole to the flat section of the cut out.

40mm Notched cam for use with FL Round face and Square face Cam locks

40mm length is measured from centre of hole to the flat section of the cut out.

45mm Notched cam for use with FL Round face and Square face Cam locks

45mm length is measured from centre of hole to the flat section of the cut out.

50mm Notched cam for use with FL Round face and Square face Cam locks

50mm length is measured from centre of hole to the flat section of the cut out.

Pin type cam.

4 mm diameter.

51 mm long pin.

Pin type cam.

6 mm diameter.

37 mm long pin.

6mm Spacer collar for use with FL Round face and Square face Cam locks